Reconnecting your TELUS Secure Business Outdoor Camera (V722) to the internet

Log in to the

web portal

.

Select .

Select .

In the drop-down menu, select the camera you would like to modify your Wireless Network settings for.

To enter the new settings: i. Select to copy the network information from another connected camera. This is recommended if there are other cameras on the account already connected to the new Wi-Fi network. ii. Select to scan for, enter the Wi-Fi password, and connect the camera to a new Wi-Fi network. iii. Select to manually enter the network’s SSID, Wi-Fi password, and encryption type.

To apply the same wireless settings to all other cameras on the account: i. Select . ii. Enable .

Select to apply the new wireless networking settings.

Hold down the WPS button on the back of the camera and release when the LED begins to flash white (about six seconds).

Join the Alarm (XX:XX:XX) Wi-Fi network from your mobile phone or on your computer.

While connected to the Alarm Wi-Fi network, type

https://ADCsetup

(or enter 192.168.1.1) in a browser and follow the on-screen steps.

Select .

Select .

Select the Wi-Fi network you would like your camera to connect to.

Type in your Wi-Fi password as the security key. Select .

Select when a pop-up window appears asking you to refer to the installation instructions. Your camera will continue to connect to your Wi-Fi network and will be solid green when complete.

Find the WPS button on your router

Find the WPS button located on your Outdoor Camera and hold it for two to three seconds until the LED light on the front of the camera begins to flash blue

Next, press the WPS button on your router for five seconds until the light flashes on your router.

Allow a couple minutes for the router and camera to connect to each other. The Outdoor Camera’s LED light will flash and then turn solid green if successful.