You can connect your Smart Hub for Business to various Local Area Networks (LANs) using a computer, third-party wireless router or a TELUS router or gateway.
Connect your Smart Hub for Business directly to your computer
Plug the SIM card into the back of the smart hub device.
Plug the power cord into the back of the device.
Plug the LAN cable into the LAN port of the device.
Plug the LAN cable into the LAN port of the computer.
Turn on the smart hub (starting up can take up to 5 minutes).
Open a browser window on the computer.
In the address bar, enter
192.168.20.1
.
Follow the wizard steps.
The smart hub will reboot once the settings have been changed (this can take up to 5 minutes).
Launch the browser and start browsing.
Connect your Smart Hub for Business to a third-party wireless router
Plug the SIM card into the back of the smart hub device.
Plug the power cord into the back of the device.
Plug the RJ45/LAN cable into the LAN port of the device.
Plug the RJ45/LAN cable into the LAN port of the computer.
Turn on the smart hub (starting up can take up to 5 minutes).
Open a browser window on the computer.
In the address bar, enter
192.168.20.1
.
Follow the wizard steps.
The device will reboot once the settings have been changed (this can take up to 5 minutes).
Unplug the LAN cable from the WAN/Internet port of your third-party wireless router/gateway.
Reboot the third-party router (this can take up to 5 minutes).
Launch the browser and start browsing.
Note
: Once the ADSL service has been restored, the LAN cable on the WAN port must be disconnected.
Connect your Smart Hub for Business to a TELUS wireless router or gateway
Plug the SIM card into the back of the smart hub.
Plug the power cord into the back of the device.
Plug the LAN cable into the LAN port of the device.
Plug the LAN cable into the LAN port of the computer.
Turn on the smart hub (starting can take up to 5 minutes).
Open a browser window.
In the address bar, enter
192.168.20.1
.
Follow the wizard steps.
The device will reboot once the settings have been changed (this can take up to 5 minutes).
Unplug the LAN cable from the computer and plug it into the WAN/Internet port of your TELUS wireless router.
Unplug the RJ11 telephone cable from the TELUS gateway/router.
Reboot the third-party wireless router (this can take up to 5 minutes).
Launch the browser and start browsing.
Note
: Once the ADSL service has been restored, the RJ11 cable must be plugged back into the TELUS gateway or router and the LAN cable on the WAN port must be disconnected.