You're currently in Personal Support. If you're a Business customer, visit our
Business Support page.

Factory reset an Actiontec V1000H or V2000H modem

How to reset an Actiontec modem to original factory settings

Steps to reset your modem

Factory resetting your modem will put all the settings back to default configuration. You should only do this if you are instructed to do so by one of our agents or one of our support articles.

To reset your
Actiontec V1000H/V2000H
to its original factory settings:

  1. Locate the red reset button on the back of the device

  2. Using a thin object (ex. a needle, paper clip, toothpick), press and hold the reset button for 30 seconds until the Internet light turns red

  3. Release the reset button

  4. Your TELUS modem will restart automatically. Please allow up to 10 minutes for the process to complete

  5. To reconnect to your modem, you will need to use the default Wi-Fi name and password listed on the sticker on the side of your modem

Factory resetting your modem will erase and reset any customized Wi-Fi name and password you may have. If you require assistance setting up a customized network name and password visit
Change your Wi-Fi network's name and password
.

Note
: Restarting or resetting your modem may only provide a temporary fix to your problem, if you find the issue reoccurs
contact us
 in order for us to find and fix the root cause of your problem.

Did this article solve your problem?

Yes
No
Learn about accessibility at TELUS