Adding an automation device through my Control Panel

On your Control Panel, select

Select

Enter your master code (disarm code)

Select

Select . The Control Panel will send a “clear” signal

Trigger or press the learn button* on the device to clear it from the system. The Control Panel returns to the Z-Wave Device menu when complete

Select

Select . Your Control Panel will search for nearby Z-Wave devices in learn mode. If it does not connect, the device may not be near enough to the Control Panel, or the learning process may not have been triggered. Move closer and retry

Trigger or press the "Learn" button on the device you would like to add (the "Learn" button varies by device. Please refer to the manufacturer’s instructions for more information)

Once connected, customize your device name using the Control Panel

Select to save the information and complete the process

Your device should now be connected to your SmartHome and ready to use

Check to see if the Z-Wave feature is enabled on your Control Panel

Select in the Control Panel

Select

Select

Enter your master code (disarm code)

Select

Trigger device or press the learn button* to erase network data and delete from network

Return to the Z-Wave toolbox menu, then select . The Control Panel will enter discovery mode

Trigger device or press the "Learn" button on your device (the "Learn" button varies by device. Please refer to the manufacturer’s instructions for more information). Your Control Panel will now search for nearby Z-Wave devices in learn mode. If it does not connect, the device may not be near enough to the Control Panel or the learning process may not have been triggered. Move closer and retry

You should see an indication in the Control Panel that the device was added to the network. The device will appear in the Z-Wave section of your Control Panel

Your device should now be connected to your SmartHome and ready to use. Use your TELUS SmartHome mobile app or web portal to access your devices and customize your system