4K HDR PVR and Wireless Digital Box installation

Disconnect all cables connected to the existing PVR

Connect the Ethernet cable to your 4K recorder

Connect your 4K recorder to your TV with the HDMI cable provided. If your TV does not have an HDMI port, connect your 4K recorder to your TV with your AV cable adapter

Connect the power of your 4K recorder with the cable provided

Using the remote control supplied with your TV, turn on the TV and use the input/source button to select the desired input

Click

here

to learn how to pair the remote control with your TV

Follow the on-screen instructions to complete the setup

Set the language of the PVR by selecting on the remote control > . Choose your preferred language and then

Please attempt a test recording to ensure recording functionality has been enabled. If recording fails, please

contact technical support

Disconnect all cables connected to the existing digital box

Connect the power of your 4K wireless digital box with the cable provided

Using the HDMI cable included in the box, connect the wireless digital box to an unused HDMI socket on your TV

Using the remote control supplied with your TV, turn on the TV and use the input/source button to select the desired input

When the screen illustrated appears, press the button on your OPTIK remote control

When the screen illustrated appears, press and hold the WPS button on your modem for 10 seconds. The Wi-Fi indicator will flash to indicate that synchronization is in progress. This may take a few minutes

A message will appear on the screen confirming that the synchronization has been successfully completed. Connection bars appear on your wireless digital box

Click

here

to learn how to pair the remote control with your TV

Set the language of the PVR by selecting on the remote control > . Choose your preferred language and then