How to set up Smart Arming

Log in to the TELUS SmartHome app.

Tap .

Tap .

Tap to enable the disarm feature. Use the drop-down menus to select the specific time to disarm the panel.: If you have motion sensors, the option to for specific times, and selected sensors included in the rule, will also be available. Use the drop-down menus to select the start and end times for this to be active. : Outdoor sensors should not be selected to prevent outside activity from disarming your system. : This feature only occurs when the panel is in mode. When is selected, the panel disarms at the end of the selected time frame if no motion is detected during the selected time.This rule is designed to disarm once during the selected time. If the panel is disarmed once due to motion, it will not disarm again at the end of the selected time. Once you have verified that the rule is set up with the correct settings, tap .

Tap to enable the to feature. Use the drop-down menus to select the specific time to arm stay the panel.

Log in

to the web portal.

On the card, select the Smart Arming icon.

Select next to . Use the drop-down menus to select the time to disarm the panel.: If you have motion sensors, the option to for selected sensors included in the rule will also be available. Use the drop-down menus to select the start and end times for this to be active. : Outdoor sensors should not be selected to prevent outside activity from disarming your system. : This feature only occurs when the panel is in mode. When is selected, the panel disarms at the end of the selected time frame if no motion is detected during the selected times.This rule is designed to disarm once during the selected times. If the panel is disarmed once due to motion, it will not disarm again at the end of the selected times.Once you have verified that the rule is configured with the correct settings, select .

Select next to . Use the drop-down menus to select the time to arm () the panel.