How to install your Network Access Hub

Check to make sure the power cable is clipped into place and hanging down.

Check that the dust covers are removed from the fibre patch cable and Pluggable Fibre Terminal.

Align the notch on the fibre patch cable with the notch on the pluggable fibre terminal or green coupler on the wall plate before inserting.

Line up the clips of the Network Access Hub with the holes on the wall plate before pushing in. Optional: Use the provided screws to secure the Network Access Hub to the wall plate.

If your Network Access Hub is in a central location like a living room, connect the Boost Wi-Fi 6 to the Network Access Hub using an Ethernet cable.

If your Network Access Hub is not in a central location like a media panel, please follow these steps: