With the device plugged into an outlet, put the device in learn mode.
For the device above, press the learn button on the front of the device twice.
For the device above, press the learn button on the top-side of the device once.
For the device above, press the learn button on the front of the device once.
For the device above, press and long hold the LED on the front of the device until it blinks amber, then press once for it to blink green.
For the device above, press the learn button on the left side of the device once.
Once the device is found, the app and the control panel will indicate the device is being added to your network.
For devices requiring an authorization key, please refer to the Z-Wave DSK PIN code sticker on the device. Enter the five-digit pin on the app and press
Continue
.